TB 140x160x14mm Metal Cased Oil Seal NBR OE 9828-01120 | Automotive Wheel Hub Repair

This aftermarket TB metal cased double lip oil seal measures 140mm ID, 160mm OD and 14mm in height, manufactured with black NBR rubber and a rigid steel outer case. It matches OE references 9828-01120 and SZ311-01006 for automotive wheel hub and rotary shaft repair applications.

Importers, wholesalers, auto repair shops and MRO distributors can submit RFQ with dimension, OE number, quantity, destination and working medium for a formal quotation. Lead Time: 7–15 days for standard production.

Features & Benefits

Rigid steel outer case delivers stable press fit in the housing bore, resists radial distortion and prevents seal rotation under road vibration and dynamic loads.
Double lip design with a single garter spring maintains consistent radial contact pressure on the shaft. Primary lip retains wheel bearing grease; secondary lip blocks road dust, mud and splash water.
Black NBR nitrile rubber lip offers good compatibility with mineral wheel bearing greases and gear oils, with balanced wear resistance for typical on-road duty cycles.
Precision finished metal outer diameter ensures reliable static sealing between seal and housing, compensates for minor bore tolerances and surface imperfections.
Standard metric dimensions match OE 9828-01120 and SZ311-01006 mounting specifications, suitable for direct aftermarket replacement.
This is an aftermarket replacement seal, not a genuine OEM part. Always verify shaft diameter, housing bore and OE number before ordering.

• MOQ：Depends on spec; typically 100–5,000 pcs. Lead Time: 7–15 days. This SKU quantity confirmed on quotation.
  Factory standard options are available for marking and packaging; confirm all requirements on RFQ.

Material & Process

• Sealing lip：NBR (nitrile butadiene rubber), black
• Reinforcement：steel metal outer case
• Spring：carbon steel garter spring
  Continuous working temperature: -30°C to +100°C; short-term peak up to +120°C. Confirm compound grade with RFQ for special applications.
• Compatible with：mineral wheel bearing grease, gear oil, standard chassis lubricants

Applications & Compatibility

Commonly used for automotive wheel hub and heavy rotary shaft sealing, suitable for passenger car and light commercial vehicle repair and replacement matching OE 9828-01120 and SZ311-01006.
Aftermarket replacement. Verify shaft diameter, housing bore and OE number before order.

Selection & Installation

Selection Tips

Confirm shaft ID 140mm, housing OD 160mm, seal height 14mm. Cross reference OE 9828-01120 or SZ311-01006 and match rubber material to your lubricant type.

Installation Steps

1. Thoroughly clean the shaft and housing bore. Remove all burrs, old seal residue, rust and contamination.
2. Lightly lubricate the sealing lip and shaft with the same grease or oil used in the assembly. Do not install dry.
3. Press the seal evenly into the housing using a proper installation tool. Keep the seal perfectly perpendicular to the bore.
4. Do not strike the rubber lip or hammer directly on the metal case edge. Avoid cocking or distorting the seal.
5. After assembly, rotate the hub by hand to check for binding. Inspect for leakage during initial test run.

Packaging & Delivery

Standard packaging: neutral polybag per piece, export carton outer packing. 50–200 pcs per carton (adjustable).

• Lead Time：7–15 days for standard production.
  Samples available for stocked sizes; sample charge and freight confirmed on request.
  Custom logo printing and private label packaging available; confirm all requirements at quotation stage.
  Send an inquiry with size (ID×OD×height in mm), OE number, quantity, destination country, working medium and any custom requirements for a firm lead time.