70x135x14/18 mm Rear Axle Wheel Hub Oil Seal NBR for Mitsubishi Fuso - OEM MH034229

Product Overview

A 70x135x14/18 mm rear axle wheel hub oil seal is a radial shaft lip seal pressed into the hub or axle housing; it holds wheel bearing grease or axle oil in the bearing and stops water, mud and road dirt from reaching it. This one is a TB9Y profile in NBR (nitrile butadiene rubber): heavy-duty stepped body with a spring-loaded main lip and an outboard contaminant exclusion lip.

VKEFOT builds this size in Xingtai, Hebei, China for distributors, fleet operators and repair programmes that buy by dimension. It is used on Mitsubishi Fuso. The three measurements on your own assembly decide the fit: shaft diameter, housing bore and available width.

Key Features & Benefits

• TB9Y profile: Heavy-duty stepped body with a spring-loaded main lip and an outboard contaminant exclusion lip.

• Metal case for press fit: The case holds its diameter in the bore, so the seal stays square and does not walk out under load and vibration.

Dimensions & Specification

Specification	Value
Inner Diameter (ID)	70 mm
Outer Diameter (OD)	135 mm
Width / Height	14 mm / 18 mm
Material	NBR (nitrile butadiene rubber)
Colour	Black
Structure	Heavy-duty stepped body with a spring-loaded main lip and an outboard contaminant exclusion lip
Seal Type	TB9Y - Rear Axle Wheel Hub Oil Seal
OEM Reference	MH034229, 03434-16501
Marking	VKEFOT
Brand	VKEFOT
Origin	Xingtai, Hebei, China

Dimensions are nominal production values measured as inner diameter x outer diameter x width. Where two widths are quoted, the first is the lip section and the second is the overall body - measure both on your sample before ordering.

Material & Construction

The sealing element is moulded from NBR (nitrile butadiene rubber), the general-purpose lip material for oil and grease service. The body is bonded to a metal case and the main lip is held on the shaft by a garter spring. Construction: heavy-duty stepped body with a spring-loaded main lip and an outboard contaminant exclusion lip.

Quality Control and Inspection

• Incoming: compound hardness checked before release to production.
• In process: lip geometry, case outside diameter and spring fit checked at set intervals.
• Final: dimensions are checked against the nominal size and the lip is inspected for cuts, flash and spring seating, then packing count verification.
• Traceability: inspection results for each batch are recorded and kept; the inspection scope can be agreed before order confirmation.

Buyers are welcome to arrange third-party inspection before shipment; state the requirement in the enquiry so it can be built into the quotation.

Customization and OEM Service

packaging and logo available upon request

Packaging, Carton and Delivery

Standard packing is individual polybag, inner carton, then export carton. Carton marks, labels and barcodes are printed to buyer specification.

Minimum order quantity depends on whether the size is a stocked standard or made to order. Pricing, MOQ, freight and trade terms are confirmed in the written quotation. Send an RFQ with quantity and destination port.

How to Order

The more of this you include, the faster and more accurate the quotation:

1. Size (70x135x14/18 mm) and the OE or part number you are replacing, plus a photo of the sample with its marking.

2. Material required: NBR, or NBR, HNBR, FKM or silicone if the duty calls for it. State the working temperature and the fluid.

3. Any special requirement on lip arrangement - single or double lip, with or without a dust lip.

4. Packaging and labelling: polybag, printed box, barcode, carton marks.

5. Destination port or address, preferred Incoterm (EXW, FOB, CFR, CIF), and whether third-party inspection is required before shipment.

Frequently Asked Questions

What are the exact dimensions of this oil seal?
70x135x14/18 - 70 mm inner diameter, 135 mm outer diameter, 14 mm width, 18 mm overall. Measure your shaft, bore and available width before ordering.

What is the minimum order quantity?
Tell us the quantity and we will state the applicable MOQ in the quotation.

What is the lead time, and can you ship by sea or air?
Both sea and air shipment can be arranged from Tianjin or Qingdao, and we can quote on EXW, FOB, CFR or CIF. Transit time depends on the destination.

Can you supply FKM or HNBR instead of NBR?
This listing is NBR (nitrile butadiene rubber). State the working temperature and the fluid and we will recommend a compound, then quote both options so you can compare.

Do you provide samples, and are they free?
Samples can be arranged so you can check size, material and lip arrangement before committing to a production quantity.

Can you produce our packaging and logo?
packaging and logo available upon request

What information do you need to quote?
Size or the OE number you are replacing, quantity, material, working temperature and fluid, packaging requirement, destination port and preferred Incoterm. A drawing or a sample gives the most accurate result.

Request a Quotation

Send the size, the part number you are replacing or a photo of the sample, the quantity and the destination port. We will come back with an itemised quotation covering unit price, MOQ, lead time, packing and shipment options - and we will confirm the size match before you commit.

VKEFOT Seals: oil seals, O-rings and custom rubber parts. Xingtai, Hebei, China.